27th October 2020

ANTI-CORROSION PROCESS PROVIDES BREAK-IN LUBRICITY

Gear component manufacturers need an in-house metal finishing process to provide break-in lubricity, robust corrosion protection and galling resistance on critical components. Birchwood Technologies’ TRU TEMP low-temperature black oxide process, the company says, meets all those requirements while creating a non-dimensional finish, without affecting material hardness and load-bearing properties.

The TRU TEMP blackening line operates at 200 deg. F and forms a satin black magnetite finish that protects critical surfaces in storage, shipment and startup, resists galling and aids in break-in. The process takes just 30 minutes.

The finish is Mil Spec and RoHS compliant, and withstands up to 120 hours of neutral salt spray or several hundred hours of humidity, figures Birchwood says are verified by independent testing. The finish is a 0.5 microns thick (20 millionths) crystalline structure that allows it to effectively hold a rust inhibitor and serves as a sacrificial barrier to provide break-in lubricity and galling resistance. Critical parts are protected for storage or overseas shipment.

The process can be installed in any plant setting, without endangering personnel or surrounding equipment. The operating solutions contain no EPA regulated chemicals, and process rinse waters are normally sent to the sewer as non-hazardous discharge. Most process lines do not require waste treatment equipment.

Process lines are available in any size to fit part size and production volume.

www.birchwoodtechnologies.com