6th July 2020

EVALUATION SHOWS DROP IN LOW-LEVEL SOLVENT EMISSIONS

The Canadian Paint and Coatings Association is hailing Environment Canada’s new figures on low-level solvent emissions. Its recently completed evaluation of the VOC Concentration Limits for Architectural Coatings Regulations reveals that the Canadian paint and coatings industry has significantly cut low- level emissions over the past four years. The study was done to evaluate the performance four years after the regulations came into force.

“We were most pleased that the VOC testing confirmed the industry met the expectations with respect to the requirements established under the VOC regulations for the paint and coatings industry,” commented Gary LeRoux, president and CEO of CPCA.

Four indicators were used to assess the performance of the regulations: percentage of products meeting the regulatory standards; marketplace availability of lower VOC products before and after the regulations; reduction of VOC emissions for the sector before and after the regulations; and Canada’s overall performance in VOC reduction and alignment with other jurisdictions, particularly in North America. Testing was done by Environment Canada’s accredited laboratories for the 10 main architectural coatings categories under the regulations.

The top 46 architectural paint manufacturing companies were confidentially surveyed for detailed VOC information. Ten of the responding companies were among the top 12 that represent 75 percent of the market size in Canada. “It was clear that a detailed qualitative survey and random sampling of paint products sold by the large manufacturers enhanced the credibility of the study,” said LeRoux.

Total VOC emissions from paint dropped to 16 kilotonnes in 2014 from 57 kilotonnes in 2005, representing a decrease in emissions of 41 kilotonnes. This represents a reduction of 73.6 per cent in VOC emissions from the projected emissions for 2014.

“By any measure this is a success for industry and shows that the paint and coatings industry in Canada has lived up to the standards set by the regulations and indeed greatly exceeded the government’s own expectations,” LeRoux noted.

Virtually all waterborne products met the VOC limits in their respective categories. However, there are reportedly challenges for solvent-borne products still on the market, especially with respect to waterproofing and medium- and high-gloss solvent-borne products. Once 100 per cent reductions are achieved in this group there will be an additional 2-kilotonne reduction in VOC emissions. According to CPCA survey results, solvent-borne coatings represent less than 10 percent of the Canadian architectural coatings market.

www.canpaint.com